state of the art, inc. 2470 fox hill road, state college, pa 16803-1797 phone (814) 355-8004 fax (814) 355-2714 toll free 1-800-458-3401 where quality isn't a goal...it's our tradition s 1512 e c 10b0 d b tolerances attenuation factor style a style e top terminations single wrap around metallized bottom size code 1005 1512 0706 sizes and ratings 1-20 db 1-20 db 1-20 db 75 100 50 termination style a, c, d, e (see above) length (inches) maximum voltage thickness (inches) .015" .015" .010" .25 watt .5 watt .125 watt .050" .125" .060" maximum power* attenuation width (inches) .100" .150" .075" b: ni barrier pretinned w: au wire bondable c: pd ag epoxy bondable termination part numbering performance packaging options substrate type - alumina or beo resistor material - thick or thin film termination material - snpb w/nickel barrier, gold, pdag testing: enviromental and electrical 100% visual customer specified testing sizes: other sizes can be manufactured. consult factory with requirements 10/01/97 three significant digits, with the letter b as the decimal in 1/2 db increments. style d style c top terminations metallized bottom wrap around (3 places) construction code *power ratings listed are for attenuators constructed on alumina, consult factory for ratings using beo. construction individual lot quantities are packaged in conductive waffle packs. tape & reel packaging is an available option. frequency dc - 18ghz vswr 1.20 : 1 dc - 4 ghz 1.30 : 1 4 - 8 ghz 1.50 : 1 8 -10 ghz size code - see table above. d: .5db f: 1db c: alumina d: beo s: standard production h: high reliability (see options) fixed chip attenuators thin film
|
